A planning tool rather than a measurement, so it is only as good as the plan put into it
Ultra and long trail races with cut-offs, aid stations and planned rest stops
Limited to a handful of watches from 2024, with no Edge support at launch
Plain English: A race plan built on a phone and carried on the watch. The runner marks the checkpoints, aid stations, cut-off times, and planned rest stops on the race route in Garmin Connect, and the watch shows them during the race. It replaces the laminated card of distances and cut-offs that ultra runners carry.
In practice: I’ve not used this feature
Quick answers
What is Garmin Course Planner?
Course Planner lets a runner add cut-off times, rest plans, checkpoints, aid stations and notes to a course in Garmin Connect, then see them on a compatible watch during the race. It is built for race day and is most useful in ultra-distance events, where time spent at aid stations decides whether a runner makes the cut-offs.
Which Garmin watches have Course Planner?
Garmin added it in its February 2026 update for Fenix 8, Fenix 8 Pro, Fenix E, Enduro 3, tactix 8, quatix 8, quatix 8 Pro, D2 Mach 2, Forerunner 570, Forerunner 970 and Venu X1. Garmin has not published an updated list since, so a later software update may have added other watches.
Does Garmin Course Planner work on Edge bike computers?
Not at launch. Garmin’s February 2026 update listed Course Planner for smartwatches only, and Edge didn’t appear in the table.
Is Course Planner the same as the Course Planner on Garmin handhelds?
No. The Montana 700 and GPSMAP handhelds have a main-menu tool called Course Planner that draws a route between points on the device. The 2026 watch feature is a race plan built in Garmin Connect, with cut-offs and rest stops on the course.
Course Planner – a deep dive
When Course Planner is actually useful
This appears to be a useful feature for those of you doing long, complex runs who like to plan in detail and rely heavily on your watch for race-day execution, or as a backup to other means. I’ve not used it.
Introduction

Garmin Course Planner adds a race’s timing and stops to a course the athlete already follows, so the watch shows how far it is to the next aid station and how long remains before its cut-off. The plan is built in Garmin Connect, and Garmin added the feature to watches in its February 2026 software update.
Course Planner is a logistics tool rather than a navigation one. Its limitation is reach: at launch, it was available only on the newest Fenix, Enduro, Forerunner, and Venu X1 watches.
What Course Planner actually means
On the watch, each planned point on the course appears as the athlete reaches it. At a planned rest stop, the watch shows the stay time and automatically starts a rest-break countdown. A cut-off alert fires 10 minutes before each checkpoint by default, which gives the runner time to change pace. These timings come from my coverage of the February 2026 update, not Garmin’s support pages, so check them against the watch’s settings.
How Course Planner works
The plan is built in Garmin Connect on the course itself. Garmin’s guide to courses gives the steps: Training and Planning, Courses, then Create. The athlete sets up the route, ideally from the race organiser’s GPX file, then adds the planned points and sends the course to the watch. The watch then follows the course as usual, with the planned points on top.
A December 2025 beta added aid stations and cut-off times to course planning, along with faster loading of long courses, before the February 2026 release. Garmin had published no detailed guide to the planner screens as of November 2026, and the watch owner’s manuals did not mention the feature.
What affects the plan on race day
The plan is only as good as the course it’s based on. A drawn course that differs from the race route moves every checkpoint, so the race organiser’s official GPX file is a better starting point than a hand-drawn line.
Distance along the course comes from the watch’s GPS, so a watch that misreads distance in tree cover or on switchbacks will show aid stations at a different point from the markers on the ground.
How accurate is Garmin Course Planner
Course Planner makes no measurement, so it has no accuracy of its own. The two things that can be wrong are the course file and the watch’s GPS distance along it, both covered in the section above.
Competitor equivalents
- Suunto offers SuuntoPlus Race Guides for named races, such as the Golden Trail World Series, showing climbs, feed zones and key sections, but they are made for set races rather than built by the runner.
- COROS, Polar and Apple have no equivalent race planner with cut-offs and rest stops.
Which Garmin devices support Course Planner
Garmin introduced Course Planner for watches on 24 February 2026, on Fenix 8, Fenix 8 Pro, Fenix E, Enduro 3, tactix 8, quatix 8, quatix 8 Pro, D2 Mach 2, Forerunner 570, Forerunner 970 and Venu X1. Venu 4, vivoactive 6, the Instinct range and Edge bike computers were not on the launch list. Garmin has published no Course Planner device table since. For later watches such as Fenix 9 and Enduro 4, and for older watches updated since February 2026, the watch’s own release notes or Garmin support will confirm it.
Where to find Course Planner on Garmin
- Garmin Connect: build the plan on a course under Training and Planning, Courses.
- Watch: the planned points appear while following the course, with a countdown at planned rest stops.
Common problems and misreadings
Searching for Course Planner brings up Garmin’s support page for the Montana 700 handheld, which has an older, unrelated tool of the same name for drawing routes on the device. Nothing on that page applies to the watch feature.
The planned points need the course to be active on the watch. A runner who starts a normal run without loading the course sees none of the plan.
How to improve Course Planner
Course Planner is a planning tool rather than a metric, so there is nothing to train. The gains come from the plan itself: realistic aid station times, and cut-offs copied from the race information.
How Course Planner connects to other Garmin features
Course Planner sits on top of a course, alongside the other race-day tools that use one. PacePro sets pace targets along the same course, ClimbPro shows the climbs ahead, and Real-Time Stamina estimates how much the runner has left between stations. The navigation features cover following the course itself, and my February 2026 update coverage lists the other features that arrived with Course Planner.
