Garmin Training Load Ratio

Home » Garmin Features » Training » Training Load Ratio
Accuracy
Unvalidated, and the band thresholds are not proven injury boundaries
Best for
Spotting sudden spikes in training after a break or a race week
Weakness
The weighting inside the 28-day baseline is unpublished, and a taper reads as Low

Plain English: Garmin compares how hard the last week has been with what the athlete has been handling over a longer stretch. A ratio near 1 means this week looks like normal. A ratio well above 1 means training has jumped, and a ratio well below 1 means it has dropped.

In practice: The ratio is useful information, but I tend to favour Load Focus as the input for changing the intensity mix of my training.

Quick answers

What is a good load ratio on Garmin?
Garmin treats 0.8 to 1.4 as the optimal band. Below 0.8 is labelled Low, 1.5 to 1.9 is High and 2.0 or more is Very High. These bands are Garmin’s own and have not been validated as injury thresholds.


What does Garmin's load ratio compare?
It divides acute load, the last week’s weighted training strain, by chronic load, which Garmin defines as a weighted average of acute load over the past 28 days. Garmin does not publish the weighting inside that window.


Why is my Garmin load ratio high after a break?
The chronic baseline falls during time off, so a normal return to training makes the last week look large against it. The ratio can reach High or Very High even with modest sessions, and a gradual return keeps it closer to the optimal band.


Why does my Garmin load ratio say Low before a race?
A taper cuts the acute load while the chronic baseline barely moves, so the ratio falls below 0.8 by design. Low during a planned taper is not a warning.


Training Load Ratio – a deep dive

When Training Load Ratio is actually useful

I’ve never used this metric much. I don’t feel I can trust it, because it seems quite precise in its recommendations when I know some critical inputs might be missing or less than perfectly accurate.

Introduction

Garmin Training Load Ratio divides acute load, Garmin’s weighted measure of the last week’s training strain, by chronic load, which Garmin defines as “a weighted average of your acute load scores over the past 28 days.” The result appears in four bands, from Low to Very High, and it needs about two weeks of training data before it shows up.

The ratio is Garmin’s version of the acute:chronic workload ratio from sports science. Its limitation is that the concept comes from team-sport research and has been seriously challenged, and Garmin publishes neither the weighting inside its 28-day chronic window nor any validation of its bands.

What Training Load Ratio actually means

A ratio of 1 means the last week matches the athlete’s longer-term habit. Garmin labels 0.8 to 1.4 as Optimal, anything below 0.8 as Low, 1.5 to 1.9 as High, and 2.0 or more as Very High. A high ratio signals a spike in training relative to the baseline, which is the pattern sports science links with greater injury risk, and a low ratio signals a drop in training, which suits a taper or recovery week but not a build. Garmin publishes no age or sex adjustment, and the bands are the same for everyone.

How Garmin calculates Training Load Ratio

Stated by Garmin: the ratio is acute load divided by chronic load, and Garmin’s Training Status page says the optimal load range is “based on a combination of your current fitness level and your activity history”. Acute load is the weighted figure described on the acute load page.

Garmin’s support FAQ now states the chronic window: a weighted average of acute load over the past 28 days, the same period Firstbeat Sports uses in its team-sport product. Garmin does not publish the weighting inside those 28 days. TrainingPeaks uses exponentially weighted averages, and whether Garmin does is unknown. The ratio updates after each completed and synced activity.

What affects the reading

The ratio compares a fast measure with a slow one, so it swings whenever the week changes sharply. A race or a double-session day lifts acute load while the baseline barely moves, and a rest week does the opposite. A taper to 0.5 or 0.6 is the maths working as intended and not a warning.

Returning after illness, injury or a holiday creates the opposite trap, because the chronic baseline decays during the break and an ordinary week can read High. Load depends on heart rate, so weeks with unmeasured gym sessions show a lower ratio than weeks where every session is tracked, and switching sport can move the ratio without any change in real stress.

How accurate is Garmin Training Load Ratio

No study has validated Garmin’s ratio against injury or training outcomes. Gabbett (2016) proposed the acute:chronic workload ratio as a predictor of non-contact soft-tissue injury using GPS and session effort data in team sport. Lolli and colleagues (2019) showed that a ratio whose chronic period includes the acute week creates a spurious correlation of about 0.50. Impellizzeri and colleagues (2021) found that replacing the real chronic load with fixed or random values produced similar injury associations, and concluded the ratio mostly rescales acute load.

The idea of avoiding sudden spikes remains well supported. The precision of the 0.8, 1.4, 1.5 and 2.0 thresholds does not, particularly for recreational runners using wrist heart rate. Trend reliability is better than any single reading.

Competitor equivalents

  • Polar divides seven-day Strain by 28-day Tolerance in Cardio Load Status, with published bands of below 0.8, 0.8 to 1.0, 1.0 to 1.3 and above 1.3.
  • Apple Watch compares seven-day training load with a 28-day baseline and describes the result in words such as steady, not as a number.
  • Coros tracks Load Impact over seven days against Base Fitness over 42 days without publishing a formal ratio.
  • Suunto reports Fitness and Fatigue values and a Form difference in the TrainingPeaks convention, so it gives a difference rather than a ratio.
  • Stryd builds its load model from running power rather than heart rate.

Which Garmin devices support Training Load Ratio

Load ratio appears on Garmin watches that run the current Training Status, and it needs about two weeks of recorded activity to show. Garmin’s page for each model confirms whether the ratio is included.

Where to find Training Load Ratio on Garmin

  • Training Status widget: the ratio with its colour band, which shows No Status until enough data exists.
  • Garmin Connect mobile, Training Status: the current ratio and its trend over recent weeks.

Common problems and misreadings

A Low ratio before a race alarms many runners, and a High ratio on return from a break looks like overreach when it is arithmetic. See Quick answers above.

The ratio can read Optimal while the legs feel flat, because it knows only about heart rate based load and not about sleep, stress or illness. It can also read High after a week of unusually long walking or hiking, which accumulates load at low intensity.

How to improve Training Load Ratio

The ratio is a pacing guide and not a score to raise. Building volume in steps small enough to keep the ratio near the optimal band lets the chronic baseline rise with the acute load, and a return from time off works best as a staged rebuild over two to three weeks. Planned easy weeks and tapers will legitimately read Low.

Scientific basis

Gabbett TJ. British Journal of Sports Medicine, 2016, 50(5): 273-280. Proposed the acute:chronic workload ratio as a predictor of soft-tissue injury, which is the concept Garmin’s ratio borrows.

Impellizzeri FM and colleagues. Sports Medicine, 2021, 51: 581-592. Challenged the ratio’s predictive value, which is why the page treats Garmin’s thresholds as unvalidated.

How Training Load Ratio connects to other Garmin features

The ratio sits inside Training Status, where it works with acute load, chronic load and VO2 max trend to produce labels such as Productive and Strained. Training Readiness lists acute load among its factors. Training Load explains how each session adds to the total.


Small things I always use

Health, recovery and sleep

  • Kineon MOVE+: Red and infrared light for sore knees, Achilles and other joints after hard training. I use it.
  • FreeStyle Libre 3 Plus: Shows how my blood sugar responds to diet. Occasional use.
  • hDrop: Measures my sweat loss in summer and indoors. I use it.
  • Fourth Frontier Zone: Checks my heart under load in hard sessions.
  • Oura Ring 5: My partner’s recovery tracker of choice.
  • Eight Sleep: A cooling mattress cover my partner and I use nightly.

Watches and sensors

On the bike

Home and indoor training

  • NPE Runn: Makes my basic treadmill smart, sending more accurate speed and distance to my watch and Zwift. I use it.
  • Google Wifi: Keeps Zwift connected in my pain cave. I use it.
  • Apple TV 4K: Zwift on the big screen. I use two.
  • Google Nest Doorbell (wired, 2nd gen): My video doorbell, running in both Google Home and Apple Home via Starling. I use it.


Reader-Powered Content

Buy me a coffee

This content is not sponsored. It’s mostly me behind the labour of love, which is this site, and I appreciate everyone who supports it.

Support the site: Follow (free, fewer ads) · Subscribe (paid, ad-free) · Buy Me A Coffee

Written by real people, with AI assistance. Fact-checked and verified for originality. See the Editorial Policy. FTC: Affiliate Disclosure — some links pay commission. As an Amazon Associate, I earn from qualifying purchases.